Basic Stamp Pic
Basic Stamp Pic
Is it possible to program a pic with the basic stamp 2?
I see that the a lot of pickit 2 revisions have only one or two chips, so I was hoping to use my basic stamp to basically emulate those chips.
In other words is it possible to put some code into a BS2 to use serout or something similar to program a pic.
It is possible to program a pic microcontroller
using BS2 is you know the chips protocol and
BS2 has enough memory to store your program
including the protocol instructions. It’s easier to
use your pc’s parallel port with something like
the pic16f84 mounted on a breadboard. In visual
basic I wrote a simple program that uses only
4 parallel port pins with “in circuit” programming.
Serout would not work in this case, but an instruction
like: BS2: pins PORTB,b’00110011′ would. The binary value
would be determined by the command or data you
are sending.
Further comment:
If the particular pic allows “one pin” serial bit stream
programming, then Serout should work. Otherwise,
extra external hardware can be added to the breadboard
to make it work.
Need more help, let me know
|
|
5PK SO8-DIP SMT SMD DIP ADAPTER BASIC STAMP PIC ATMEL $6.99 |
|
|
10PK SO8-DIP SMT SMD DIP ADAPTER BASIC STAMP PIC ATMEL $11.99 |
|
|
USB Weather Data Acquisition Electronic Kit ( ARDUINO Microchip PIC Basic Stamp $14.95 |
|
|
XBee adapter 3.3V BASIC STAMP, PIC, AVR, MSP430, 8051 $7.99 |
|
|
XBee adapter 5V BASIC STAMP, PIC, AVR, MSP430, 8051 $9.99 |
|
|
XBee to USB adapter BASIC STAMP, PIC, AVR, MSP430 $24.99 |
|
|
128×64 LCD Display for Microcontroller Basic Stamp PIC $21.29 |
|
|
I2C-16IO I2C 16-BIT GPIO Expander BASIC STAMP PIC AVR $16.99 |
|
|
I2C-7SEG (I2C 4-DIG 7-SEGMENT) BASIC STAMP, PIC, ATMEL $22.99 |
|
|
I2C-ADC (I2C 12-BIT, 8-CH ADC) BASIC STAMP, PIC, ATMEL $19.99 |
|
|
I2C-TMP (12-Bit Digital Temp. Sensor) BASIC STAMP, PIC $14.99 |
|
|
I2C-TRN (I2C Voltage Translator) BASIC STAMP PIC ATMEL $999.99 |
|
|
4×4 Matrix Keyboard Keypad PIC AVR BASIC STAMP 8051 ARM $12.99 |
|
|
7-Segment Common Anode PIC AVR BASIC STAMP 8051 ARM MSP $6.99 |
|
|
7-Segment Common Cathode PIC AVR BASIC STAMP 8051 ARM $6.99 |
|
|
Audio Amplifier Amp Output PIC AVR ARM 8051 BASIC STAMP $14.99 |
|
|
DC MOTOR Experiment Board PIC AVR ARM 8051 BASIC STAMP $29.99 |
|
|
I2C Real Time Clock (RTC) PIC AVR ARM 8051 BASIC STAMP $18.99 |
|
|
Stepper Setpping Motor PIC AVR ARM 8051 BASIC STAMP MSP $24.99 |
|
|
Adapter boards (4) SOIC DIP Basic Stamp PIC Arduino SMT $4.35 |
|
|
MICRO SD Card Adapter BASIC STAMP PIC AVR ARM ARDUINO SD-ADP $6.00 |
|
|
INBOARD – 24LC32 I2C EEPROM to PIC AVR ARM BASIC STAMP $13.00 |
|
|
BS2 Breadboard Robot Complete Kit PIC Basic Stamps $137.00 |
|
|
+5V Breadboard Power Supply Kit (PIC, AVR, BASIC STAMP) $13.99 |
|
|
DC MOTOR Experiment Board PIC AVR ARM 8051 BASIC STAMP $29.99 |
|
|
MicroSD Card Adapter BASIC STAMP, PIC, AVR -MICROSD-ADP $16.99 |
|
|
SD MMC Card Adapter BASIC STAMP, PIC, AVR (SD-ADP) $18.99 |
|
|
PIC-BEE XBee radio interface AVR BASIC STAMP Arduino $47.99 |
|
|
128×64 LCD Display for Microcontroller Basic Stamp PIC $19.95 |
|
|
128×64 LCD Display for Microcontroller Basic Stamp PIC $21.29 |
|
|
I2C-RTC (I2C Real-time Clock RTC) BASIC STAMP, PIC $16.99 |
|
|
128×64 LCD Display for Microcontroller Basic Stamp PIC $21.29 |